EasyManuals Logo

Lexmark 210 User Manual

Lexmark 210
367 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #304 background imageLoading...
Page #304 background image
Unformatted flash detected [53]
Try one or more of the following:
From the printer control, select Continue to stop the defragmentation and continue printing. For nontouchscreen
printer models, press
to confirm.
Format the flash memory.
Note: If the error message remains, then the flash memory may be defective and need to be replaced.
Unsupported disk
1 Remove the unsupported disk, and then install a supported one.
2 Select Continue to clear the message and continue printing. For nontouch screen printer models, press to
confirm.
Unsupported option in slot [x] [55]
1 Turn off the printer.
2 Unplug the power cord from the wall outlet.
3 Remove the unsupported option card from the printer controller board, and then replace it with a supported card.
4 Connect the power cord to a properly grounded electrical outlet.
5 Turn the printer back on.
USB port [x] disabled [56]
Try one or more of the following:
Select Continue to clear the message. For non-touch-screen printer models, press to confirm.
The printer discards any data received through the specified serial port.
Select Reset active bin to reset the active bin for a linked set of bins.
Make sure the USB Buffer menu is enabled.
Solving printer problems
“Printer does not respond” on page 305
“Printing problems” on page 307
“Hardware and internal option problems” on page 314
“Paper feed problems” on page 318
“Print quality problems” on page 320
Troubleshooting 304

Table of Contents

Other manuals for Lexmark 210

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark 210 and is the answer not in the manual?

Lexmark 210 Specifications

General IconGeneral
BrandLexmark
Model210
CategoryPrinter
LanguageEnglish

Related product manuals