The following illustration shows the maximum number of optional finishers and trays that are supported by the printer.
For more information on other configurations, visit
www.lexmark.com/multifunctionprinters.
Hardware option Alternative hardware option
1 Staple finisher
• Output expander
• 4‑bin mailbox
• Staple, hole punch finisher
2 4‑bin mailbox
• Staple finisher
• Staple, hole punch finisher
• Output expander
3 Caster base None
4 2100‑sheet tray None
5 550‑sheet tray 250‑sheet tray
6 250‑sheet tray 550‑sheet tray
7 4‑bin mailbox Output expander
8 Output expander 4‑bin mailbox
The staple, hole punch finisher must not be combined with any other output options.
In a configuration with two or more optional finishers:
• The staple finisher must always be on top.
• The high‑capacity output expander must always be at the bottom.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 44
To Next Page
