2 Click Settings > Fax Settings > Analog Fax Setup.
3 In the Fax Name or Station Name field, enter the name to be printed on all outgoing faxes.
4 In the Fax Number or Station Number field, enter the printer fax number.
5 Click Submit.
Choosing a fax connection
Notes:
• The printer is an analog device that works best when directly connected to the telephone wall outlet. Other
devices(such as a telephone or answering machine) can be successfully attached to pass through the printer, as
described in the setup steps.
• If you want a digital connection such as ISDN, DSL, or ADSL, then a third-party device (such as a DSL filter) is
required. Contact your DSL provider for a DSL filter. The DSL filter removes the digital signal on the telephone
line that can interfere with the ability of the printer to fax properly.
• You do not need to attach the printer to a computer, but you do need to connect it to an analog telephone line
to send and receive faxes.
Equipment and service options Fax connection setup
Connect directly to the telephone line. See “Connecting to an analog telephone line” on page 125.
Connect to a Digital Subscriber Line (DSL or ADSL) service. See “Connecting to a DSL service” on page 126.
Connect to a Private Branch eXchange (PBX) or Integrated
Services Digital Network (ISDN) system.
See “Connecting to a PBX or ISDN system” on page 126.
Use a Distinctive Ring service. See “Connecting to a distinctive ring service” on page 127.
Connect through an adapter used in your area. See “Connecting to an adapter for your country or region” on
page 127.
Connecting to an analog telephone line
If your telecommunications equipment uses a US‑style (RJ11) telephone line, then follow these steps to connect the
equipment:
1 Connect one end of the telephone cable that came with the printer to the printer LINE port .
2 Connect the other end of the telephone cable to an active analog telephone wall jack.
Faxing 125
To Next Page
Loading...
Need help?
General