Lexmark 21J0380 - X 772e MFP Color Laser User Manual

Installing the printer on a wireless network (Macintosh)
Make sure to disconnect the Ethernet cable when installing the printer on a wireless network.
Prepare to configure the printer
1
Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer
on.
2 Locate the printer MAC address.
a From the home screen, navigate to:
> Reports > Network Setup Page
b In the Standard Network Card section, look for UAA (MAC).
Note: You will need this information later.
Enter the printer information
1
Access the AirPort options:
In Mac OS X version 10.5 or later
From the Apple menu, navigate to:
System Preferences > Network > AirPort
In Mac OS X version 10.4 or earlier
From the Finder, navigate to:
Applications > Internet Connect > AirPort
2 From the Network Name pop‑up menu, select print server [yyyyyy], where the y's are the last six digits of the MAC
address located on the MAC address sheet.
3 Open a Web browser.
4 From the Bookmarks menu, select Show or Show All Bookmarks.
5 Under COLLECTIONS, select Bonjour or Rendezvous, and then double‑click the printer name.
Note: The application referred to as Rendezvous in Mac OS X version 10.2 is now called Bonjour by Apple Inc.
6 From the Embedded Web Server, navigate to where the wireless settings information are stored.
Additional printer setup 58

Lexmark 21J0380 - X 772e MFP Color Laser Specifications

General

Print Technology	Laser
Print Speed (Black)	35 ppm
Print Speed (Color)	35 ppm
Print Resolution	1200 x 1200 dpi
Paper Capacity	550 sheets
Duplex Printing	Yes
Maximum Paper Size	8.5 x 14 inches
Fax	Yes
Copy Speed (Black)	35 cpm
Copy Speed (Color)	35 cpm
Fax Modem Speed	33.6 Kbps
Connectivity	USB, Ethernet
Scanner Type	Flatbed, ADF
Scan Resolution	600 dpi
Operating System Compatibility	Windows, Mac, Linux
Functionality	Print, Copy, Scan, Fax
Display	Color Touch Screen