1 Top 15 2 mm (6 i n.)
2 Rear 152 mm (6 in.)
3 Right side 152 mm (6 in.)
4 Front 406 mm (16 in.)
Note: The minimum space needed in front of the printer is 75 mm (3 in.)
5 Left side 152 mm (6 in.)
Printer configurations
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, see
www.lexmark.com/multifunctionprinters.
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
You can configure your printer by adding optional 550‑ or 2100‑sheet trays. For more information, see
“Installing
the 550‑sheet tray” on page 306 or “Installing the 2100‑sheet tray” on page 307.
Learning about the printer 13
To Next Page
Loading...
Need help?
General
