Lexmark 25B2010 - Printing from a Cloud Connector Profile

3 Click Print and Hold.
4 Select Use Print and Hold, and then assign a user name.
5 Select the print job type
(Confidential,
Repeat, Reserve, or Verify).
If you select Confidential, then secure the print job with a personal identification number (PIN).
6 Click OK or Print.
7 From the printer home screen, release the print job.
• For
confidential
print jobs, touch Held jobs > select your user name >
Confidential
> enter the PIN >
select the print job >
configure
the settings > Print.
• For other print jobs, touch Held jobs > select your user name > select the print job > configure the settings
> Print.
For Macintosh users
Using AirPrint
1 With a document open, choose File > Print.
2 Select a printer, and then from the drop-down menu following the Orientation menu, choose PIN Printing.
3 Enable Print with PIN, and then enter a four‑digit PIN.
4 Click Print.
5 From the printer home screen, release the print job. Touch Held jobs > select your computer name >
Confidential > enter the PIN > select the print job > Print.
Using the print driver
1 With a document open, choose File > Print.
2 Select a printer, and then from the drop-down menu following the Orientation menu, choose Print and Hold.
3 Choose Confidential Print, and then enter a four‑digit PIN.
4 Click Print.
5 From the printer home screen, release the print job. Touch Held jobs > select your computer name >
Confidential > select the print job > enter the PIN > Print.
Printing from a Cloud Connector profile
1 From the home screen, touch Cloud Connector.
2 Select a cloud service provider, and then select a
profile.
Note: For more information on creating a Cloud Connector profile, see “Creating a Cloud Connector
profile” on page 23.
3 Tou ch Print, and then select a file.
If necessary, change the settings.
Note: Make sure to select a supported file.
4 Print the document.
Printing 50