EasyManuals Logo

Lexmark 25B2010 User Manual

Lexmark 25B2010
342 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #270 background imageLoading...
Page #270 background image
Unable to read flash drive
Action Yes No
Step 1
Check if the printer is not busy processing another print, copy,
scan, or fax job.
Is the printer ready?
Go to step 2. Wait for the printer to
finish processing the
other job.
Step 2
Check if the flash drive is supported. For more information, see
“Supported flash drives and file types” on page 48.
Is the
flash
drive supported?
Go to step 3. Insert a supported
flash drive.
Step 3
a Check if the USB port is enabled. For more information, see
“Enabling the USB port” on page 270.
b Remove, and then insert the flash drive.
Does the printer recognize the flash drive?
The problem is
solved.
Contact
customer
support.
Enabling the USB port
From the home screen, touch Settings > Network/Ports > USB > Enable USB Port.
Network connection problems
Cannot open Embedded Web Server
Action Yes No
Step 1
Check if the printer is on.
Is the printer on?
Go to step 2. Turn on the printer.
Step 2
Make sure that the printer IP address is correct.
Notes:
View the IP address on the home screen.
An IP address appears as four sets of numbers separated by
periods, such as 123.123.123.123.
Is the printer IP address correct?
Go to step 3. Type the correct
printer IP address in
the address
field.
Troubleshooting 270

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark 25B2010 and is the answer not in the manual?

Lexmark 25B2010 Specifications

General IconGeneral
BrandLexmark
Model25B2010
CategoryAll in One Printer
LanguageEnglish

Related product manuals