Lexmark 25B2010 - Scanning Problems

Scanning problems
Cannot scan to a computer
Action Yes No
Step 1
Perform a copy job.
Is the copy job successful?
Go to step 3. Go to step 2.
Step 2
a Turn o the printer, wait for about 10 seconds, and then turn it
back on.
b Scan the document.
Can you scan the document to a computer?
The problem is
solved.
Go to step 3.
Step 3
Check the printer connectivity.
a Print the Network Setup Page. From the control panel, navigate
to:
Settings > Reports > Network > Network Setup Page
b Check the network status.
Is the printer connected to the network?
Go to step 5. Go to step 4.
Step 4
a Connect the printer to the network.
b Scan the document.
Can you scan the document to a computer?
The problem is
solved.
Go to step 5.
Step 5
a Make sure that the printer and the computer are connected to
the same network.
b Scan the document.
Can you scan the document to a computer?
The problem is
solved.
Contact
customer
support.
Troubleshooting 286