Lexmark 25B2010 - Page 188

Lexmark XM7355 and XM7370 Return Program toner cartridges
Item United States,
Canada, Australia,
and New Zealand
Europe, Middle East,
and Africa
Asia Pacific Latin America
Return Program toner
cartridge
25B3086
1
25B3090
2
25B3101
1
25B3107
2
25B3121
1
25B3122
2
25B3128
1
25B3129
2
1
Supported only in the Lexmark XM7355 printer model.
2
Supported only in the Lexmark XM7370 printer model.
Regular toner cartridges
Item Worldwide
Ultra high yield toner cartridge 58D0UA0
Ordering an imaging unit
Extremely low print coverage for extended periods of time may cause imaging unit parts to fail before the toner
exhaustion.
Item Lexmark Return Program
Corporate Return Program
*
Regular
Imaging unit 58D0Z00 58D0Z0E 58D0ZA0
* This imaging unit is available only for contract‑managed printers. For more information, contact your Lexmark
representative or system administrator.
Ordering a staple cartridge
Part name Part number
Staple cartridge 35S8500
Ordering a maintenance kit
To identify the supported fuser type, open door A, and then remove the toner cartridge and the imaging unit.
Find the two‑digit fuser type in front of the fuser, for example, 00 or 01.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.
Notes:
• Using certain types of paper may require more frequent replacement of the maintenance kit.
• The separator assembly, fuser, pick roller assembly, and transfer roller are included in the maintenance
kit and can be ordered individually and replaced if necessary.
• For more information on replacing the maintenance kit, see the documentation that came with the kit.
Maintaining the printer 188