Menu item Description
Printer Emulations
Emulator Security
Reset Emulator After Job
O*
On
Reset the emulator after a print job.
Printer Emulations
Emulator Security
Disable Printer Message Access
O
On*
Disable access to printer message during emulation.
Fax Configuration
Fax Low Power Support
Disable Sleep
Permit Sleep
Auto*
Set fax to enter Sleep mode whenever the printer determines
that it should.
Note: This menu item appears only in some printer models.
Fax Configuration
Fax Storage Location
NAND
Disk*
Set the storage location for all faxes.
Notes:
• This menu item appears only when a hard disk is
installed.
• This menu item appears only in some printer models.
Print Configuration
Font Sharpening
0–150 (24*)
Set a text point-size value below which the high‑frequency
screens are used when printing font data.
For example, if the value is 24, then all fonts sized 24 points or
less use the high‑frequency screens.
Print Configuration
Print Density
1–5 (3*)
Copy Density
1–5 (3*)
Adjust the toner density when printing or copying documents.
Print Configuration
A4 Fuser
Compress*
Clip
Set the fuser behavior when printing on a letter-size paper.
Device Operations
Quiet Mode
O*
On
Set the printer to operate in Quiet Mode.
Note: Enabling this setting slows down the overall
performance of the printer.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 91
To Next Page
Loading...
