Lexmark B3340dw - Paper jam in the rear door

6 Remove the tray.
7 Push the duplex unit latch to open the duplex unit.
8 Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
9 Close the duplex unit.
10 Insert the tray.
Paper jam in the rear door
1 Open the front door.
Warning—Potential Damage: To prevent damage from
electrostatic discharge, touch any exposed metal frame of
the printer before accessing or touching interior areas of the
printer.
2 Remove the imaging unit.
Warning—Potential Damage: Do not expose the imaging
unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.
Warning—Potential Damage: Do not touch the
photoconductor drum. Doing so may aect the quality of
future print jobs.
3 Open the rear door.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
4 Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
5 Close the rear door.
10