5
Shake the toner cartridge to redistribute the toner.
6
Insert the new toner cartridge into the imaging unit until it clicks
into place.
7
Insert the imaging unit.
8
Close the door.
Loading trays
1
Remove the tray.
Note: To avoid paper jams, do not remove the tray while the
printer is busy.
2
Adjust the guides to match the size of the paper that you are
loading.
3
Flex, fan, and align the paper edges before loading.
4
Load the paper stack with the printable side facedown, and
then make sure that the guides fit snugly against the paper.
Notes:
•
Load letterhead facedown with the header toward the
front of the tray for one
‑
sided printing.
•
Load letterhead faceup with the header toward the back
of the tray for two
‑
sided printing.
•
Do not slide paper into the tray.
•
To avoid paper jams, make sure that the stack height is
below the maximum paper fill indicator.
3
To Next Page
Loading...
