5
Insert the tray.
If necessary, set the paper size and paper type from the control
panel to match the paper loaded.
Loading the multipurpose feeder
1
Open the multipurpose feeder.
2
Flex, fan, and align the paper edges before loading.
3
Load paper with the printable side faceup.
Notes:
•
Load letterhead faceup with the header toward the rear
of the printer for one
‑
sided printing.
•
Load letterhead facedown with the header toward the
front of the printer for two
‑
sided printing.
•
Load envelopes with the flap facedown on the left side.
Warning—Potential Damage: Do not use envelopes with
stamps, clasps, snaps, windows, coated linings, or self
‑
stick
adhesives.
4
Adjust the guide to match the size of the paper that you are
loading.
5
From the control panel, set the paper size and paper type to
match the paper loaded.
Setting the paper size and type
1
From the control panel, navigate to:
Settings >
> Paper > > Tray Configuration >
> Paper Size/Type > > select a paper source
2
Set the paper size and type.
Connecting a mobile device to the
printer
Note: This feature is available only in some printer models.
Before connecting your mobile device, make sure to do the
following:
•
Enable Wi
‑
Fi Direct in the printer. From the control panel,
navigate to:
Settings > > Network/Ports > > Wireless >
> Enable Wi
‑
Fi Direct > > On >
•
View the Wi
‑
Fi Direct SSID. From the control panel, navigate
to:
4
To Next Page
Loading...
