Printer configurations
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, see
www.lexmark.com/multifunctionprinters.
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
Depending on your printer model, you can configure your printer by adding an optional 650‑sheet duo tray, a
550‑sheet tray, or both. For more information, see
“Installing optional trays” on page 164.
1 Control panel
Note: The appearance may vary depending on your printer model.
2 Standard bin
3 Standard 250‑sheet tray
4 Manual feeder
5 Optional 650‑sheet duo tray
Note: This tray is available only in some printer models.
6 Optional 550‑sheet tray
Note: This tray is available only in some printer models.
Learning about the printer 12
To Next Page
Loading...
Need help?
General
