Installing an output expander
11
Installing and removing options
Installing an output expander
Your printer supports an optional output expander that lets you stack up to 650 sheets of paper in one bin.
Note: After you unpack the output expander, install it immediately. Otherwise, the edges of the mounting
brackets could damage tabletops or fabrics.
1 Unpack the output expander and remove any packing material.
2 Remove the printer top cover.
Warning: The output expander tray is designed to hold the weight of print material only. Do not use it as a shelf;
excess weight may cause it to disengage from the output expander.
3 Align the mounting brackets on the bottom of the output expander with the slots in the top of the printer, and then
lower the output expander into place.
To Next Page
Loading...
Need help?
General
