Linking trays
40
Printing
Mac OS 9.x
1 In your word processor, spreadsheet, browser, or other application, select File Page Setup.
2 Choose the correct printer in the Format For pop-up menu.
3 Choose the paper size from the Paper pop-up menu.
4 Click OK.
5 Select File Print.
6 Select the General panel, and then choose the paper source from the pop-up menus as appropriate.
7 Select the Paper panel, and then choose the paper type from the Paper Type pop-up menu.
8 Send your print job as usual.
Mac OS X
1 In your word processor, spreadsheet, browser, or other application, select File Page Setup.
2 Choose the correct printer in the Format For pop-up menu.
3 Choose the paper size from the Paper Size pop-up menu.
4 Click OK.
5 Select File Print.
6 Select the Paper panel in the copies & pages menu, and then choose the paper type from the Paper Type
pop-up menu.
7 Select the Paper Feed panel, and then choose the paper source from the pop-up menus as appropriate.
8 Send your print job as usual.
Linking trays
• If you load the same size and type of paper or specialty media in more than one tray, the printer automatically links
the trays. This means that when one tray is empty, it feeds from the next linked tray.
For example, if you have the same size and type of paper or specialty media loaded in tray 2 and tray 4, the printer
feeds from tray 2 until it becomes empty, and then it feeds from the next linked tray—tray 4.
• If you load the same size paper or specialty media in each tray, make sure it is also all the same type to link the
trays.
Once the trays you selected are loaded with the same size and type of paper or specialty media, select the same
Paper Type setting in the Paper Menu for these sources.
• To disable tray linking, set the Paper Type or Paper Size to a unique value in each one of the trays.
For more information, see the Menus and Messages Guide on the Software and Documentation CD
To Next Page
Loading...
Need help?
General
