Removing memory and option cards
22
Installing and removing options
5 Remove the four access cover screws as shown.
6 Remove the access cover.
Removing memory cards
Complete the following steps to remove printer memory or flash memory cards.
Warning: Printer memory and flash memory cards are easily damaged by static electricity. Touch something
metal on the printer before you touch a memory card.
1 Remove the system board access cover. For more information, see Accessing the printer system board.
2 Locate the memory card you want to remove.
3 Push the latches on both ends of the connector away from the card.
4 Pull the card straight out of the connector.
5 Place the card in its original packaging, or wrap the card in paper and store it in a box.
6 Reinstall the system board access cover. For more information, see Reinstalling the system board access
cover.
To Next Page
Loading...
