Fuser and ITU
63
Maintaining the printer
Fuser and ITU
Refer to the part number listed on the fuser or ITU for the appropriate reordering number for these items.
Ordering a fuser
Note: When the 87 Fuser Life Warning message appears on the display, you should order a new fuser.
Order the correct type of fuser for your printer. Only order a web oiler fuser if an authorized servicer
has installed a web oiler upgrade kit to allow your printer to print large quantities of vinyl or dual web
labels.
Ordering an image transfer unit and transfer roller
When the 83.yy ITU life warning message appears on the display, you should order a new image transfer unit. Use
part number 40X1680 to order an image transfer unit.
For more information about warning messages, see the Menus and Messages Guide on the publications CD.
Ordering staple cartridges
Staple cartridges hold 3,000 staples. Use part number 11K3188 to order a pack of three staple cartridges.
Recycling Lexmark products
To return Lexmark products to Lexmark for recycling:
1 Visit our Web site:
www.lexmark.com/recycle
2 Follow the instructions on the computer screen.
Type of fuser Printer voltage Part number
Standard fuser or web oiler fuser 100 V (Japan) 40X1667
110 V - 127 V 40X1651
220 V - 240 V 40X1666
To Next Page
Loading...
Need help?
General
