Removing memory and option cards
21
Installing and removing options
6 Secure the card to the system board with the screw.
Removing memory and option cards
To remove memory or option cards, use the following illustration to locate the connector for the card you want to remove.
Accessing the printer system board
1 Turn the printer off.
2 Unplug the printer power cord from the wall outlet.
3 Disconnect all cables from the back of the printer.
4 Locate the access cover on the back of the printer.
Option card
connector
Firmware and
flash memory
card connectors
Hard disk
connector
Memory card
connector
To Next Page
Loading...
