PostScript
4-97
Interpreter name (Read-only)
Supported values are:
PostScript
AutoSelect
PCL
PPDS
On boolean Designates if the communication channel is On and able to receive and
send data. Supported values are:
True Data is sent and processed.
False Data is lost.
PCLSmartSwitch boolean Supported values are:
True PCL SmartSwitch is On.
False PCL SmartSwitch is Off.
For more information, see “Using SmartSwitch” on page 2-1.
PortLocation string (Read-only) Designates the physical location of the port related to the
parameter set. Supported values are:
Standard Port
Option Slot 1
Option Slot 2
Option Slot 3
PSSmartSwitch boolean Supported values are:
True PS SmartSwitch is set to On.
False PS SmartSwitch is set to Off.
For more information, see “Using SmartSwitch” on page 4-1.
Type name (Read-only) Always returns the value of /Communications.
Device Parameters for the Communication Device %USB%, %USB_A%, %USB_B%, %USB_C%, %USB_D%
(%USB_NV% and %USB_Pending% contain the same parameters)
DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job.
Supported values are:
True An end-of-file message is not sent until the current job and all
preceding jobs finish printing.
False An end-of-file message is sent as soon as a job finishes
executing in the interpreter, whether or not that job has
finished printing.
Enabled boolean (Read-only)
Supported values are:
True
False
Table 4-21: PostScript Emulation Device Parameters (Continued)
Key Type Definition
To Next Page
Loading...
