Lexmark C910 - Page 362

Interfaces
8-24
AUTOFD* Receiver for the Lexmark C750
The following diagram illustrates the AUTOFD* receiver for the Lexmark C750.
AUTOFD* Receiver for the Lexmark C910
The following diagram illustrates the AUTOFD* receiver for the Lexmark C910.
FCT 2827
690 pF ±10%
+5V, 5%
GND
Connector
Pin
39 ohm ±5%
1.5K ohm ±10%
FCT 2828
or
FCT 2827
690 pF ±10%
+5V, 5%
GND
Connector
Pin
39 ohm ±5%
1.5K ohm ±10%