Lexmark C910 - Page 363

Interfaces
8-25
AUTOFD* Receiver for the Lexmark J110
The following diagram illustrates the AUTOFD* receiver for the Lexmark J110.
AUTOFD* Receiver for the Lexmark T420, T520, T522, T620, T622, W812, and
W820
The following diagram illustrates the AUTOFD* receiver for the Lexmark T420, T520,
T522, T620, T622, W812, and W820.
690 pF ±10%
+5V, 5%
GND
Connector
Pin
39 ohm ±5%
1.1K ohm ±10%
FCT 2827,
FCT 2828, or
ASIC Pin (J110)
620 pF ±10%
+5V, 5%
GND
Connector
Pin
39 ohm ±5%
1.1K ohm ±10%
FCT 2827