To Next PageTo Next PageWhat to check if the paper tray does not raise or lower correctly on my Lexmark Printer?
Check the following: the printer is properly attached to the high capacity feeder, the printer is powered on, the power cord is plugged firmly into the back of the high capacity feeder, the power cord is plugged into an outlet, and the outlet has power.
What to check if the paper tray lowers unexpectedly on my Lexmark C920?
Check to see if your printer is out of paper or has a jam.
Why are blank pages feeding into the output bin of my Lexmark C920 Printer?
Blank pages may feed if an incorrect media type is loaded in the tray. Load the correct type media for your print job, or change the Paper Type setting to match the type of media loaded.
Why do jobs not print on my Lexmark C920?
Several factors can prevent jobs from printing. The printer might not be ready to receive data; ensure that 'Ready' or 'Power Saver' is displayed. The output bin could be full, so remove the paper. The tray might be empty; load paper into the tray. You might be using the wrong printer driver or printing to a file. Also, the interface cable might be faulty or not securely connected; ensure you're using a recommended cable and that the connection is secure.
What to do if my Lexmark Printer frequently jams?
Frequent paper jams may occur if you are using paper that does not meet the printer specifications. Use recommended paper and other specialty media. Ensure that the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the multipurpose feeder. Make sure the guides in the selected tray are set to the appropriate position for the size paper loaded. High humidity may cause the paper to absorb moisture. Load paper from a fresh package and store paper in its original wrapper until you load it.
What to do if held jobs do not print on my Lexmark C920 Printer?
If held jobs do not print, a formatting error may have occurred, or the printer has received invalid data. You can try to print the job (only part of the job may print) or delete the job.
What to do if my Lexmark C920 Printer prints blank pages?
If blank pages are feeding into the output bin, an incorrect media type may be loaded in the tray being printed from. Load the correct type of media for your print job, or change the Paper Type setting to match the type of media loaded.
How to resolve a blank page issue on Lexmark C920 Printer?
If your Lexmark Printer is producing blank pages, ensure the affected print unit is completely installed in the printer. If the problem persists, try replacing the affected toner cartridge.
Why is my Lexmark C920 printing blank pages?
If the page from your Lexmark Printer is blank, ensure the affected print unit is completely installed. If the issue persists, replace the affected toner cartridge.
What to do if the Paper Jam message remains on my Lexmark Printer after removing the jammed paper?
If the Paper Jam message persists after removing the jammed paper, it indicates that the entire paper path wasn't cleared. Make sure to remove any remaining paper from the entire paper path.
General
