Installing an option card
32
Installing and removing options
Installing an option card
Your printer has one expansion card slot that supports a number of option cards. The following table describes their
function.
Note: The network models ship with an Ethernet print server already installed.
You need a small Phillips screwdriver to install these options.
1 Remove the system board access cover (see Removing the system board access cover).
2 Remove the screw from the metal plate that covers the connector slot, and then lift the plate off.
Save the screw.
Warning: Option cards are easily damaged by static electricity. Touch something metal, such as the printer
frame, before you touch an option card.
3 Unpack the option card.
Save the packing materials.
Card Function
MarkNet N8000 series internal print
server
Adds an Ethernet, Token-Ring, or Fiber port to connect your printer to a
network.
Serial/Parallel 1284-C Interface Card Adds an RS-232C serial and 1284-C parallel interface port.
Coax/Twinax Adapter Card for SCS Adds a coaxial/twinaxial network port.
802.11g Wireless Print Adapter Connects to an optional MarkNet N8000 series internal print server to add
US or international 802.11g wireless printing capability.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
