Removing the system board access cover
26
Installing and removing options
Removing the system board access cover
You must remove the system board access cover to install memory cards, a firmware card, a hard disk, or an option card.
CAUTION: This printer weighs 77–107 kg (170–235 Ib) and requires four people to lift. Anytime you move or lift
the printer, make sure you have enough people to help. Use the handholds located on the sides to lift
the printer.
This printer has a Kensington Security Slot, which can work with a Kensington lock to secure the system board access
cover. This may need to be unlocked before the system board access cover can be removed.
Rear cover
Kensington security slot
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
