Removing an optional drawer
49
Installing and removing options
Removing an optional drawer
1 Turn the printer off.
2 Unplug the power cord.
Note: To prevent an electrical overload, plug your printer into a well-grounded outlet on a non-ground fault
interrupter (GFI) circuit.
3 Disconnect the USB or Ethernet cable from the printer.
If you have any other devices connected to the printer, turn them off and unplug any cables going to the printer.
CAUTION: This printer weighs 77–107 kg (170–235 Ib) and requires four people to lift. Anytime you move or lift
the printer, make sure you have enough people to help. Use the handholds located on the sides to lift.
4 Lift the printer and move it away from the optional drawer.
CAUTION: An optional drawer weighs 18.5 kg (40.8 Ib). Have someone help when lifting.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
