Aligning the optional finisher
41
Installing and removing options
If you previously lowered or raised the guide rail plate, the thumbscrews will already be loose.
2 Rotate the rear adjustment knobs to equally align the top and bottom of the finisher with the printer.
To move the top of the finisher closer to the printer, rotate the adjustment knobs clockwise.
To move the top of the finisher away from the printer, rotate the adjustment knobs counterclockwise.
3 Roll the finisher toward the printer until the finisher locks to the docking plate pins.
You hear a click when the finisher locks into position.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
