Loading the high capacity feeder
67
Printing
7 Place the paper against the paper guides with the print side up.
Note: Do not exceed the maximum stack height. Overfilling the tray may cause paper jams.
8 Press the paper tray button.
The paper tray lowers so you can load another 500 sheets of paper.
Note: If there is only a partial stack of paper in the tray, the paper low sensor will not allow the tray to go
down. Add more paper to lower the tray.
9 Place the paper against the paper guides, with the print side up.
10 Repeat step 8 and step 9 until you have filled the tray or loaded the desired quantity.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
