L
Lynn BlairAug 31, 2025
What to do if Lexmark C925 Printer needs supply to complete job?
- SStephanie ParkAug 31, 2025
If your Lexmark Printer indicates that a supply is needed to complete the job, touch Cancel to clear the message.
To Next PageTo Next Page
What to do if Lexmark C925 Printer needs supply to complete job?
If your Lexmark Printer indicates that a supply is needed to complete the job, touch Cancel to clear the message.
What to do when Lexmark C925 Printer fuser is near life?
If your Lexmark Printer displays a 'Fuser near life warning', order a replacement fuser immediately. When print quality is reduced, install the new fuser, following the instruction sheet that came with the replacement part. You can also touch Continue to clear the message and continue printing.
What to do if Lexmark C925 Printer waste toner bottle is nearly full?
If your Lexmark Printer's waste toner bottle is nearly full, order a replacement waste toner bottle immediately. You can also replace the waste toner bottle, or touch Continue to clear the message and continue printing.
What to do when Lexmark C925 imaging unit is nearly low?
If your Lexmark Printer's imaging unit is nearly low, order a replacement imaging unit. When print quality is reduced, install the new imaging unit, following the instruction sheet that came with the replacement part. You can also touch Continue to clear the message and continue printing.
How to install tray in Lexmark C925?
To install the specified tray in your Lexmark Printer: Turn the printer off, unplug the power cord from the wall outlet, install the specified tray, connect the power cord to a properly grounded electrical outlet, and then turn the printer back on. Alternatively, you can cancel the print job.
How to fix 'Not enough free space in flash memory for resources' on Lexmark Printer?
To resolve the 'Not enough free space in flash memory for resources' error on your Lexmark Printer, try the following: Touch Continue to clear the message and continue printing. Note that downloaded fonts and macros not previously stored in flash memory are deleted. You can also delete fonts, macros, and other data stored in flash memory, or upgrade to a larger capacity flash memory card.
How to fix Lexmark Printer when cartridge is low?
If your Lexmark printer indicates that a color cartridge is low, order a replacement toner cartridge immediately. You can also try these steps: remove the specified cartridge, firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner, reinsert the cartridge, and then touch Continue to clear the message and continue printing. Repeat this procedure multiple times until the print remains faded, and then replace the cartridge.
What to do if Lexmark C925 Printer memory is full?
If your Lexmark Printer displays a 'Memory full' message, you can touch Cancel job to clear the message. Alternatively, install additional printer memory.
How to fix incorrect paper size error on Lexmark Printer?
To resolve the incorrect paper size error on your Lexmark Printer, try the following: Load the appropriate paper or specialty media in the proper tray. Ensure that the wheel on tray 1 is set to the paper size loaded in the tray and that this size matches what you are trying to print. Check the length and width guides of the tray to ensure the paper is properly loaded. Also, verify that the Print Properties or Print dialog settings have the correct paper size and type. Alternatively, touch Continue to clear the message and print using a different tray.
Why is my Lexmark C925 printing blank pages?
If your Lexmark Printer is printing blank pages, ensure that the toner or print cartridge is not low.
General| Security algorithms | 802.1x RADIUS, LEAP, MD5, PEAP, SSL/TLS |
|---|---|
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Network connection type | Ethernet LAN |
| Supported network protocols | TCP/IP IPv4, IPX/SPX, AppleTalk, LexLink (DLC), TCP/IP IPv6, TCP, UDP |
| USB 2.0 ports quantity | - |
| Ethernet LAN (RJ-45) ports | 1 |
| Internal | Yes |
| Product color | Green, Silver |
| Package weight | 1500 g |
