Lexmark C925 - Licensing the Printer

Licensing the printer
Installing an individual license
1 From the Embedded Web Server, do one of the following:
• Click Settings > Device Solutions >Embedded Solutions.
• Click Settings or Configuration >Embedded Solutions.
2 Under Installed Solutions, click the name of the application you are licensing.
3 Click License.
4 Click Update License.
5 Make sure Local is selected, and then click Browse to locate the license file.
6 After locating the appropriate license file, click Update License.
Using a network license
Copying the license file to the Lexmark License Server
Note: Before installing a network license, copy the license files to the license server.
1 Copy the license file to the following directory on the network license server:
C:\Program Files\Lexmark\LicenseServer\Licenses
2 On the host computer, open the Control Panel.
3 Under Administrative Tools, click Services.
4 Select License Server.
5 Stop and then restart the License Server service.
Configuring the network license
1
From the Embedded Web Server, do one of the following:
• Click Settings > Device Solutions >Embedded Solutions.
• Click Settings or Configuration >Embedded Solutions.
2 Click Network License.
3 Enter the IP address or hostname and optional port for the network license server where the license is stored. You
can enter values for up to three separate servers.
4 Specify the Heartbeat Period (2–60 minutes), to designate how often the printer will contact the network license
server to check for updates and maintain access to an electronic license.
5 Specify the Number of Retries (1–5), to set the maximum number of times the printer can attempt to obtain a
license before quitting.
6 Click Apply.
Configuring the application
7