4 For Directory path, type the name of the image file folder you created on your USB drive.
5 Under Slide Show Settings, specify the Global interval by typing the number of seconds each slide should be displayed
before changing.
6 Check the Repeat box to re-run the slideshow on a continuous basis.
7 Click Apply.
Exporting and importing configuration files
After configuring an application, you can export your current settings into a file that can then be imported and used to
configure that application on one or more additional printers.
Exporting and importing application settings using the Embedded Web Server
Note: Not available on all printer models.
Exporting configuration settings
1 From the application configuration settings, click Export.
2 Follow the browser prompts to save the configuration file. You will have the option to enter a unique file name or
use the default name.
Note: If a JVM Out of Memory error occurs, repeat the export until the settings file is saved.
Importing configuration settings
1 From the application configuration settings, click Import.
2 Browse to the saved configuration file, and then load or preview it.
Note: If a timeout occurs and a blank screen appears, refresh the browser, and then click Apply.
Configuring the application
9
To Next Page
Loading...
