Use To
Manual Color (continued)
CMYK Image
CMYK Text
CMYK Graphics
Customize the CMYK color conversions.
Select from the following options:
US CMYK
Euro CMYK
Vivid CMYK
O
Notes:
• US CMYK is the factory default setting. This applies a color conversion table
that tries to produce output that matches SWOP color output.
• Euro CMYK is the international factory default setting. This applies a color
conversion table that tries to produce output that matches Euroscale color
output.
• Vivid CMYK increases color saturation for the US conversion table.
• O turns o color conversion.
Spot Color Replacement Assign specific CMYK values to named spot colors.
Note: This menu is available only in the Embedded Web Server.
Color Adjust Initiate a recalibration of color conversion tables and allow the printer to make
adjustments for color variations in output.
Notes:
• Adjusting color starts when the menu is selected. Adjusting color
appears on the display until the process is finished.
• Color variations in output sometimes result from changeable conditions
such as room temperature and humidity. Color adjustments are made on
printer algorithms. Color alignment is also recalibrated in this process.
Utilities menu
Use To
Activate Hex Trace Assist in isolating the source of a print job problem.
Notes:
• When activated, all data sent to the printer is printed in hexadecimal and
character representation, and control codes are not executed.
• To exit or deactivate Hex Trace, turn
o
or reset the printer.
Coverage Estimator
O
On
Provide an estimate of the percentage coverage of toner on a page. The
estimate is printed on a separate page at the end of each print job.
Note: O is the factory default setting.
Understanding the printer menus 80
To Next Page
Loading...
Need help?
General
