Lexmark CS410 - Page 129

Supported bar codes
129
EAN/JAN-13,
JIS-UCC
YYYYYYY EAN-13 is the European version of UPC-A.
The first two digits designate the country where the
article is made.
The next five digits show the producer of the article,
followed by five digits, which identify the article
number.
The last digit is the checksum.
EAN-13 supports a supplemental two- or five-digit
number to be appended to the main bar code
symbol.
EAN/JAN-13 +
2-digit supplemental
YYYYYYY
2
EAN/JAN-13 +
5-digit supplemental
YYYYYYY
2
Bar code name
Lexmark Forms and Bar Code Card v3.0 Lexmark Forms and Bar Code Card v3.1 Lexmark Forms and Bar Code Card v3.2 Lexmark Forms and Bar Code Card v3.3 LDSS Forms  Composer  v3.3.9 LDSS  Document  Producer Lexmark Optra Forms
Sample image Comments
1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer, and when the accompanying bar code dictionaries
have been installed in Optra Forms.
2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms
when the bar code option is installed in
the printer, and the accompanying bar code dictionaries is installed in Optra Forms.
3 These bar codes are not available in PCL 5 or PostScript.