Lexmark CX532 - Page 241

Error codes Error message Solution
11.91 Load multipurpose feeder
with <type/> <size/>.
Open the multipurpose feeder, and
then load paper. For more
information, see
“Loading the
multipurpose feeder” on page 51.
11.92 Load multipurpose feeder
with <type/> <size/>
<orientation/>.
12.11 Change <source/> to <type/>
<size/>.
Open the indicated tray, remove
paper, and then load the correct
paper type and size. For more
information, see
“Loading trays” on
page 47.
12.12 Change <source/> to <type/>
<size/> <orientation/>.
12.91 Change multipurpose feeder
to <type/> <size/>.
Remove paper, and then load the
correct paper type and size. For more
information, see
“Loading the
multipurpose feeder” on page 51.
12.92 Change multipurpose feeder
to <type/> <size/>
<orientation/>.
29.08 Remove packing material.
1 Open door A.
2 Remove the red packing material
behind the front door.
3 Open door B.
4 Remove the packing material
near the toner cartridges.
5 Close door B, and then close
door A.
31.35z Reinstall missing or unresponsive
waste toner bottle.
1 Open door A.
Warning—Potential
Damage: The inside of the
printer might be hot. To reduce
the risk of injury from a hot
component, allow the surface to
cool before touching it.
2 Open door B.
3 Remove the right cover.
4 Remove the waste toner bottle.
5 Align, and then insert the waste
toner bottle.
6 Align, and then attach the right
cover.
7 Close door B, and then close
door A.
31.40z, 31.41z, 31.42z, 31.43z Reinstall missing or
unresponsive [color]
cartridge.
1 Open door B.
2 Remove the cartridge.
3 Insert the cartridge.
4 Close door B.
Troubleshoot a problem 241