Lexmark CX532 - Page 242

Error codes Error message Solution
31.60z Reinstall missing or unresponsive
black imaging kit.
1 Open door A.
Warning—Potential
Damage: The inside of the
printer might be hot. To reduce
the risk of injury from a hot
component, allow the surface to
cool before touching it.
2 Open door B.
3 Remove all toner cartridges.
4 Remove the right cover.
5 Remove the waste toner bottle.
6 Pull out the imaging kit.
7 Insert the imaging kit until it is
fully seated.
8 Align, and then insert the waste
toner bottle.
9 Align, and then attach the right
cover.
10 Insert the toner cartridges.
11 Close door B, and then close
door A.
31.65z Reinstall missing, unplugged, or
unresponsive black and color
imaging kit.
32.40z, 32.41z, 32.42z, 32.43z Replace unsupported [color]
cartridge.
For more information, see
“Replacing
a toner cartridge” on page 184.
32.65z Replace unsupported black and color
imaging kit.
For more information, see
“Replacing
an imaging kit” on page 186.
33.40, 33.41, 33.42, 33.43 Non-Lexmark [color]
cartridge, see User's
Guide.
For more information, see
“Non‑Lexmark supply” on page 289.
33.65 Non-Lexmark black and color
imaging kit, see User's Guide.
37.1 Insucient memory to collate job. Try one or more of the following:
• To uc h Continue to print the part
of the job that is stored and to
begin collating the rest of the print
job.
• Cancel the current print job.
37.3 Insucient memory, some held jobs
were deleted.
Touch Continue to clear the message
and continue printing.
38.1 Memory full. Try one or more of the following:
• To uc h Cancel job to clear the
message.
• Print the document in several
parts, or send it to another printer.
• Install more printer memory.
Troubleshoot a problem 242