Lexmark CX725 Series - Repeating Defects

Action Yes No
Step 7
Remove, and then reinstall the imaging kit.
Is the print still too light?
Contact
customer
support.
The problem is
solved.
Print crooked or skewed
) )
ABCDE
ABCDE
ABCDE
Action Yes No
Step 1
a Remove the tray.
b Remove the paper, and then load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store
paper in its original wrapper until you are ready to use it.
c Squeeze and slide the paper guides to the correct position for
the size of the paper you are loading.
d Insert the tray.
e Resend the print job.
Is the print still crooked or skewed?
Go to step 2. The problem is
solved.
Step 2
a Check if you are printing on a supported paper.
b Resend the print job.
Is the print still crooked or skewed?
Contact
customer
support.
The problem is
solved.
Repeating defects
)
)
)
Troubleshooting 117