Scanning
Scanning to an FTP server
1 Load the original document into the ADF tray or on the scanner glass.
2 From the home screen, touch FTP, and then enter the needed information.
3 If necessary, configure other FTP settings.
4 Send the FTP job.
Creating an FTP shortcut
1 From the home screen, touch FTP.
2 Enter the FTP server address, and then touch .
3 Enter a shortcut name.
4 Apply the changes.
Scanning to a flash drive
1 Load an original document into the ADF tray or on the scanner glass.
2 Insert the flash drive into the USB port.
3 Select the destination folder, and then touch Scan to USB.
4 If necessary, adjust the scan settings.
5 Send the scan job.
Warning—Potential Damage: Do not touch the printer or the
flash
drive in the area shown while actively
printing, reading, or writing from the memory device. Loss of data or a malfunction can occur.
Scanning 50
To Next Page
Loading...
