Lexmark CX725 Series User Manual

5 Reattach the access cover.
6 Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
Installing a printer hard disk
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer o, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them o as well, and unplug any cables going into the
printer.
1 Turn
o
the printer, and then unplug the power cord from the electrical outlet.
2 Using a flat‑head screwdriver, remove the controller board access cover.
Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board electronic
components or connectors.
Upgrading and migrating 142

Lexmark CX725 Series Specifications

General

Print Technology	Color Laser
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Fax Resolution	Up to 300 x 300 dpi
Scan Type	Flatbed, ADF
Duplex Printing	Yes
Processor Speed	1.2 GHz
Standard Paper Input	650 pages
Functions	Print, Copy, Scan, Fax
Mobile Printing	Yes
Print Speed (Letter, Black)	35 ppm
Print Speed (Letter, Color)	35 ppm
Print Speed (Black)	35 ppm
Print Speed (Color)	35 ppm
Scan Resolution	600 x 600 dpi
Memory	2 GB
Connectivity	USB, Ethernet
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux