Lexmark CX725 Series User Manual

Faxing
Setting up the printer to fax
Notes:
• The following connection methods are applicable only in some countries or regions.
• During the initial printer setup, clear the fax function check box and any other function you plan to set up
later, and then touch Continue.
• The indicator light may blink red if the fax function is enabled and not fully set up.
Warning—Potential Damage: Do not touch cables or the printer in the area shown while actively sending or
receiving a fax.
Setting up the fax function
1 From the home screen, touch Settings > Device > Preferences > Run Initial Setup.
2 Turn o the printer, wait for about 10 seconds, and then turn it back on.
3 From the Before You Begin screen, select Change the Settings and Continue with the Wizard.
4 From the Fax/Email Server Setup screen, enter the needed information.
5 Finish the setup.
Faxing 34

Lexmark CX725 Series Specifications

General

Print Technology	Color Laser
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Fax Resolution	Up to 300 x 300 dpi
Scan Type	Flatbed, ADF
Duplex Printing	Yes
Processor Speed	1.2 GHz
Standard Paper Input	650 pages
Functions	Print, Copy, Scan, Fax
Mobile Printing	Yes
Print Speed (Letter, Black)	35 ppm
Print Speed (Letter, Color)	35 ppm
Print Speed (Black)	35 ppm
Print Speed (Color)	35 ppm
Scan Resolution	600 x 600 dpi
Memory	2 GB
Connectivity	USB, Ethernet
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux