Fax Server Setup
General Fax Settings
Menu item Description
To Fo rma t Specify a fax recipient.
Note: If you want to use the fax number, then type the number sign (#) before
a number.
Reply Address Specify a reply address for sending fax.
Subject Specify the fax subject and message.
Message
Enable analog receive
O*
On
Set the printer to receive analog faxes.
Note: An asterisk (*) next to a value indicates the factory default setting.
Fax Server E‑mail Settings
Menu item Description
Use E‑mail SMTP Server
On*
O
Use the Simple Mail Transfer Protocol (SMTP) settings for e‑mail in receiving
and sending faxes.
Note: When set to On, all other settings of theFax Server E‑mail Settings
menu are not shown.
Primary SMTP Gateway Type the IP address or host name of the primary SMTP server.
Primary SMTP Gateway Port
1–65535 (25*)
Enter the port number of the primary SMTP server.
Secondary SMTP Gateway Type the server IP address or host name of your secondary or backup SMTP
server.
Secondary SMTP Gateway Port
1–65535 (25*)
Enter the server port number of your secondary or backup SMTP server.
SMTP Timeout
5–30 (30*)
Set the time before the printer times out if the SMTP server does not respond.
Reply Address Specify a reply address for sending fax.
Use SSL/TLS
Disabled*
Negotiate
Required
Specify whether to send fax using an encrypted link.
Require Trusted Certificate
O
On*
Specify a trusted certificate when accessing the SMTP server.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 111
To Next Page
Loading...
Need help?
General
