Scanning to a fax server
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Scan Center, and then from the list of destinations, select Fax.
3 Select a fax destination.
Note: To create a fax destination, touch Create Fax.
4 Scan the document.
Sending scanned documents to a computer
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Scan
Profiles
> Scan To Computer.
3 Select the scan profile where you want to save the document.
Scanning to a Cloud Connector profile
Note: This application is available only in certain country or region. For more information, contact your
Lexmark representative.
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Cloud Connector.
3 Select a cloud service provider, and then select a profile.
Note: For more information on creating a Cloud Connector
profile,
see
“Creating a Cloud Connector
profile”
on page 21.
4 Tou ch Scan, and then assign a
filename
and destination folder.
Scanning 64
To Next Page
Loading...
Need help?
General
