“Toner easily rubs o” on
page 368
“Uneven print density” on
page 369
“Horizontal dark lines” on
page 369
“Vertical dark lines” on
page 371
“Horizontal white lines”
on page 372
“Vertical white lines” on
page 373
“Repeating defects” on
page 375
Printer error codes
Error codes Error message Solution
2.01 Supply needed. Touc h Cancel Job and order the needed
supply. For more information, see
“Ordering parts and supplies” on page
264.
3.01 The standard output bin is
full.
Remove paper from the bin, and then touch
Continue.
3.21, 3.22, 3.23, 3.24 Remove paper behind tray [x].
1 Remove the indicated tray.
2 Remove any jammed paper in the area.
3 Insert the tray.
7.13, 7.23, 7.33,7.43, 7.53 Insert tray [x]. Try either of the following:
• Insert the indicated tray.
• Cancel the current print job.
8.01 Close the front door. Keep the front door closed unless
performing maintenance.
8.02, 8.03, 8.04, 8.05 Close door [x]. Keep the indicated door closed unless
performing maintenance.
Troubleshoot a problem 348
To Next Page
Loading...
