Error codes Error message Solution
39.10 Complex page, some data may
not have printed.
Try one or more of the following:
• Touch Continue to clear the message
and continue printing.
• Cancel the current print job.
• Install more printer memory.
• Reduce the complexity and size of the
print job before sending it to print again.
• Reduce the number of pages in the print
job.
• Reduce the number and size of any
downloaded fonts.
• Delete any unnecessary fonts or
macros from the print job.
• Reduce the number of graphics in the
print job.
51 Defective flash detected. Try one or more of the following:
• Replace the flash card.
• Touch Continue to clear the message
and continue printing.
• Cancel the current print job.
52 Not enough free space in flash
memory for resources.
Try one or more of the following:
• Touch Continue to clear the message
and continue printing.
• Delete fonts, macros, and other data
stored in the
flash
memory.
• Install a hard disk. For more information,
see
“Installing a printer hard disk” on
page 118.
Note: Downloaded fonts and macros
that are not previously stored in the
flash memory are deleted.
55.1 Error reading USB drive.
Remove USB
Remove the flash drive to continue.
55.2 Error reading USB hub. Remove
hub.
Remove the USB hub to continue.
55.3 Unplug and change mode.
61 Remove defective disk. Replace the defective storage drive.
Troubleshoot a problem 351
To Next Page
Loading...
