32
Understanding the control panel lights
ENA connection lost
Host interface disabled
Light sequence:
• Continue—On
• Paper Jam—Blinking
• Error—On
What this light sequence means:
The printer cannot establish communication with the network.
What you can do:
• Press Continue to clear the code and continue
printing. (The previous print job may not print correctly.)
Light sequence:
• Continue—On
• Load Paper—Blinking
• Paper Jam—Blinking
• Error—On
What this light sequence means:
The printer USB or parallel port has been disabled.
What you can do:
Press Continue to clear the code. The printer discards any
print jobs previously sent. Enable the USB or parallel port by
selecting a value other than Disabled for the USB Buffer or
Parallel Buffer item in the Local Printer Settings Utility (see Using
the Local Printer Settings Utility on page 75).
To Next Page
Loading...
