79
Knowing when you need new supplies
Recognizing the control panel light sequences
The control panel displays certain light sequences to let you know when the toner level is low or when it’s time to replace
the photoconductor kit.
Note: The control panel may also display other light sequences in conjunction with the “Toner low” and
“Replace photoconductor” lights.
Printer Condition Page Continue Error
Toner Low /
Replace PC Kit
Load Paper Paper Jam Ready
Toner low 16
Photoconductor kit
life warning
17
Replace
photoconductor
(printer hard stop)*
18
* If the control panel lights display this sequence, the printer will not print any more jobs until the photoconductor kit is
replaced.
= On = Blinking = Slow blink
mpty = Off
To Next Page
Loading...
