84
Print your printer menu settings pages. See Printing the menu settings
6 Install the print cartridge assembly into the printer by aligning the green arrows on the guides of the print cartridge
assembly with the green arrows on the tracks in the printer and pushing the print cartridge assembly in as far as it
will go.
7 Close the front door.
8 Turn the printer back on.
9 Reset the photoconductor counter (see the instruction sheet that shipped with the new photoconductor kit).
Print your printer menu settings pages. See Printing the menu settings and network setup pages on page 74. If
Photoconductor is listed under Warnings, the photoconductor counter has not been properly reset.
Recycling
Lexmark products
To return Lexmark products to Lexmark for recycling:
1 Visit our Web site:
www.lexmark.com/recycle
Note: Follow the instructions on the computer screen.
To Next Page
Loading...
