The Lexmark E210 printer is certified in the U.S. to
conform to the requirements of DHHS 21 CFR Subchapter
J for Class I (1) laser products, and elsewhere is certified
as a Class I laser product conforming to the requirements
of IEC 825.
Class I laser products are not considered to be hazardous.
The printer contains internally a Class IIIb (3b) laser that is
nominally a 5 milliwatt gallium arsenide laser operating in
the wavelength region of 770-795 nanometers. The laser
system and printer are designed so there is never any
human access to laser radiation above a Class I level
during normal operation, user maintenance, or prescribed
service condition.
NOTICES
C.2
Notices
Laser Notice
To Next Page
Loading...
