Selecting the Output Location
The printer has two output locations: the face-up output slot and the face-down output
slot. You can select the output location by changing the position of the output lever on
the front of the printer. To use the face-down output slot, be sure the output lever is in
upper (normal) position. To use the face-up output slot, push it down to open the slot.
• If paper coming out of the face-down output slot has problems, such as excessive
curl, try printing to the face-up output slot.
• To avoid jams, do not change the position of the output lever while the printer is
printing.
The face-down output slot collects
paper face down in correct order.
Make sure that the output lever is in
the upper position. (If not, push it up.)
The face-down output slot is used for
most print jobs and is recommended
for printing up to 100 sheets of paper
continuously.
Printing to the Face-Down Output Slot
4.6
USING PRINT MEDIA
To Next Page
Loading...
