Printing on Card Stock
1 Load card stock in the input tray you
want to use with print side up, short
edge first.
2
Push the guide against the stack of
card stock without bending the stack.
3 Push the output lever down.
Postcards and 3 by 5 in. (index) cards can be printed with your printer.
Guidelines
• Always insert the short-edge first into the input tray. If you want to print in
landscape mode, make this selection through your software. Inserting paper long-
edge first may cause a jam.
• Do not print on card stock that is too small or too large. The minimum size is 76 by
127 mm (3 by 5 in.) for the manual input tray and 95 by 127 mm (3.8 by 5 in.) for
the automatic input tray, and the maximum size is 216 by 356 mm (8.5 by 14 in.).
• Set margins at least 6.4 mm (0.25 in.) away from the edges of the print media in
the software application.
4.21
USING PRINT MEDIA
To Next Page
Loading...
