4.4
When selecting or loading paper, envelopes, or other special
print media, follow these guidelines:
• Attempting to print on damp, curled, wrinkled, or torn print
media can cause jams and poor print quality.
• Use cut-sheet paper only. You cannot use multi-part paper.
• Use only high-quality, copier grade paper.
• Do not use print media that has already been printed on or
that has been fed through a photocopier.
• Do not use paper with irregularities, such as tabs or
staples.
• Do not attempt to load any tray during printing and never
overfill a tray. This may cause a jam.
• Avoid paper with embossed lettering, perforations or
texture that is too smooth or too rough.
• Colored paper should be of the same high quality as white
photocopy paper. The pigments must withstand the printer
fusing temperature of 400°F (205°C) for 0.1 second without
deterioration. Do not use paper with a colored coating that
was added after the paper was produced.
Print Media Guidelines
Choosing Paper and Print Media
USING PRINT MEDIA
To Next Page
Loading...
